Carbon additive using Steel & Iron making and Steel & Iron castings. It is high quality raw material for Steel & Iron making , also using Steel & Iron castings by Cupola Furnace , Electric Arc furnaces, Mid- frequency furnaces .
       LLM Carbon additive , The carbon is absorbed effect in the iron liquor high 1-3 times than conventional grain Carbon additive, also does not slagging , reduces practice cost large scale in foundry .
       Especially Synthetic Graphite products, LLM strict control raw material as international standard, the products achieving super low sulfur low nitrogen, also supply size 0.2-0.8mm for very special requirements, such as carbon injection, ladle trim, rotary furnace and additions that demand small particle size .

Carbon additive for Foundries - Synthetic Graphite
ZGF95001	Chemical Compositions　%
	F.C	Ash	V.M	S	Moisture
	93-96	1.0max	2-6	0.01max	1.0max
Size:3-10mm 90%min		Packing:20Kg paper box X 40 ,800Kg bags.
GPC 98003	98.9min	1.0max	0.1max	0.03max	0.5max
	98.5max	1.0max	0.5max	0.05-0.1	0.5max
	98 max	1.0max	1.0max	0.1max	0.5max
Size:0.5-5mm, 0.2-0.8mm		Packing: 1000Kg bags or as users detail requirements.
Carbon additive for Steel making - Synthetic Graphite
F.C	Ash	V.M	S	Moisture	Size
98%min	1.0%max	1.0%max	0.1%max	0.5%max	1-10mm90%min
95%min	3.0%max	2.0%max	0.2%max	1.0%max	1-10mm90%min
Other Carbon additive for Steel making and Foundries
Silicon Carbide/ Carbon additive
F.C	SiC	SiC+F.C	S	Moisture	Size
25-30%	50-55%	80%min	0.3%max	1.0%max	0-2mm90%min
Other Size and Spec as users detail requirements. Packing: 1000Kg bags or as users detail requirements.

BACK